ADAPTERS, HARDWARE, AND BREATHERS
12497980
Chrome Bolt Kit – Center Bolt Design
- Service replacement parts for 1986 and newer center hold-down design; die-cast aluminum valve covers in chrome, crinkle, and polished finishes
- Will not fit production valve covers
12356818
Chrome Hold-Down Bolt
- Chrome valve cover hold-down bolt
- Used on all 1986 and newer engines with center hold-down design stamped valve covers
NOTE: Package contains one bolt. Order four per valve cover.
10066008
Black Hold-Down Bolt
- Black valve cover hold-down bolt
- Used on all 1986 and newer engines with center hold-down design stamped valve covers
NOTE: Package contains one bolt. Order four per valve cover.
88962074
Oil Baffle Tube
- Pushes easily into most valve covers that have an oil baffle
- Requires breather P/N 25534355; used on ZZ572 engines
25534355
Circle Track Breather
Special breathers for circle track valve covers used on circle track and ZZ572 engines
- Chrome breathers are 1 3/8" hose-clamp style with the Bowtie logo on top
- Installs on the left side of each valve cover
- Kit includes two breathers
12341993
Push-in Oil Filler Cap
- For valve covers with 1.22" hole
19131218
Chrome Push-in Breather
- 2-3/4" O.D. x 1-1/2" tall with 3/4" nipple
- Used on our Fast Burn 385, ZZ4, and 350 engines
12341986
Hold-Down Clamps
- Clamps to minimize distortion of valve cover flanges on 1955-1986 Chevrolet Small-Block V-8 and 90° V-6 engines
NOTE: four clamps per package; order two per engine.
14082321
Spring Bar Retainer
- Special steel retainers prevent oil leaks
- Use under the valve cover bolts
- Distribute clamping force over a large area and prevent deformation of the flanges
- Narrow retainers are engineered to fit pre-1986 engines with perimeter-style hold-downs
NOTE: Package contains one retainer. Order four per valve cover.
14044820
Spring Bar Retainer, Chrome-Plated
- Similar to retainer P/N 14082321 described above
- Chrome-plated to match chrome valve covers
NOTE: Package contains one retainer. Order four per valve cover.
3933964
Valve Cover Gasket
- Cork-type gasket
- Fits all valve covers with perimeter hold-down bolts
NOTE: one gasket per package
10046089
Valve Cover Gasket
- For 1986 and newer center hold-down design valve covers
19244451
CLASSIC-STYLE DRESS UP PARTS
- Deluxe Dress-Up Kits
- Small Block 262-400 Engines (1959-1986)
- Get everything you need to give your Small-Block a fresh new look in one package.
- Any one of the four finishes, with boldly striking CHEVROLET and Bowtie Emblems, offer a distinctive look which is a must have when showing off your Chevrolet Pride!
VISIT OUR BRANDS FOR YOUR OE NEEDS
Search
